Difference between revisions of "Analytical Instruments"

From Chemical Engineering @ UP wiki
Jump to: navigation, search
(Created page with ''''INSTITUTE OF APPLIED MATERIALS and SOUTH AFRICAN RESEARCH CHAIR IN CARBON TECHNOLOGY AND MATERIALS EQUIPMENT LIST''' ''' Supplier ''' …')
 
Line 1: Line 1:
'''INSTITUTE OF APPLIED MATERIALS and SOUTH AFRICAN RESEARCH CHAIR IN CARBON TECHNOLOGY AND MATERIALS EQUIPMENT LIST'''
 
  
 +
  
''' Supplier '''                                        '''Instrument'''
+
AMS Laboratory Technologies                         TA Instruments TMA Q400
+
<nowiki>
 +
  
AMS  Laboratory Technologies                            TA Instruments Simultaneous DSC-TGA SDT Q600 fitted with Pfeiffer vacuum ThermostarTM Gas analysis system
+
(Pfeiffer: Air and Vacuum Technologies)                Mass Spectrometer (Up to 1500 C)
+
INSTITUTE OF APPLIED MATERIALS and SOUTH AFRICAN RESEARCH CHAIR IN CARBON TECHNOLOGY AND MATERIALS EQUIPMENT LIST
  
Microsep                                         Mettler Toledo Stare TGA/SDTA (Up to 1500 C)
+
Supplier Instrument
 +
AMS Laboratory Technologies TA Instruments TMA Q400
 +
AMS  Laboratory Technologies
 +
(Pfeiffer: Air and Vacuum Technologies) TA Instruments Simultaneous DSC-TGA SDT Q600 fitted with Pfeiffer vacuum ThermostarTM Gas analysis system Mass Spectrometer (Up to 1500 C)
 +
Microsep Mettler Toledo Stare TGA/SDTA (Up to 1500 C)
 +
LAS  (Life and Analytical Sciences) Perkin Elmer TGA 4000 interfaced with Perkin Elmer Spectrum 100S FTIR  via Perkin Elmer Redshift TG-IR
 +
(Up to 1000 C)
 +
LAS  (Life and Analytical Sciences) Perkin Elmer DMA 8000 (Up to 600 C)
 +
Shimadzu Shimadzu DTA 50 (Up to 1500 C)
 +
ALS
 +
(Advanced laboratory solutions) Anton Paar Rheometer Physica MCR301 with 600 C furnace
 +
SMM Leica optical microscope DM 2500 M with Cambridge ??? hot stage shear cell (up to ?? C)
 +
Poretech Micromeritics Accupyc II 1340 gas pycnometer
 +
Poretech Micromeritics
 +
Geopyc 1360 Envelope and T.A.P. Density Analyser
 +
Mixing equipment
 +
Lenton LabPlant laboratory Spray Dryer (Model SD Basic)
 +
UNW Twin screw TX28P 28 mm 18 L/D compounder
 +
Dayton Ribbon Blender
 +
Apollo Scientific cc Buehler Alpha 2 speed grinder-polisher
 +
Jones Industrial mixer
 +
Jones Z-Blade mixer
 +
Silverson L4RT high shear mixer
 +
Furnaces and ovens
 +
Thermal Technologies INC 2 x 2800 C Graphitising furnaces
 +
Russet Large furnace Specify maximum temperature
 +
Vulcan Induction Furnace Specify maximum temperature
 +
Protea High Temperature furnace Specify maximum temperature
 +
Protea Tube furnace horizontal Specify maximum temperature
 +
PFE Tube furnace vertical  Specify maximum temperature
 +
Various ovens
 +
 +
Communition equipment
 +
Netzsch Netzsch LME stirred disk mill
 +
Lenton Ball Mill
 +
 +
Presses and moulding equipment
 +
???? Injection moulder (????)
 +
A.P. Design Hydraulic Press
 +
Others
 +
Beckman Centrifuge
 +
Vertex Pressure Vessel
 +
Vertex Hydraulic press
 +
???? QUV weathering tester with A340 UV lamps
  
LAS  (Life and Analytical Sciences)                    Perkin Elmer TGA 4000 interfaced with Perkin Elmer Spectrum 100S FTIR via Perkin Elmer Redshift TG-IR
 
                                                        (Up to 1000 C)
 
  
LAS  (Life and Analytical Sciences)                 Perkin Elmer DMA 8000 (Up to 600 C)
 
  
Shimadzu                                         Shimadzu DTA 50 (Up to 1500 C)
 
  
ALS  (Advanced laboratory solutions)                    Anton Paar Rheometer Physica MCR301 with 600 C furnace
 
  
SMM                                                 Leica optical microscope DM 2500 M with Cambridge ??? hot stage shear cell (up to ?? C)
 
  
Poretech                                         Micromeritics Accupyc II 1340 gas pycnometer
 
  
Poretech                                         Micromeritics Geopyc 1360 Envelope and T.A.P. Density Analyser
+
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
The following instruments are available:
 +
• Anton Paar 301 high temperature (600°C) rheometer with dynamic capability and normal force measurement to determine the viscoelastic behaviour of carbon precursor materials during transformation to solid carbon. The instrument will also be used for food science and polymer research and is available for the study of colloidal and nanodispersions. It will be managed by the carbon group personnel.
 +
• TA Instruments DSC-TGA SDT Q600 Thermogravimetric analyser (TGA) with 1500°C capability fitted with a Pheiffer vacuum Thermostar MS mass spectrometer for chemical analysis of volatile species and with simultaneous differential thermal analysis (DTA).
 +
• TA Instruments TMA Q400 Thermo-mechanical analyser (TMA) (1000°C) for the expansion, softening and in dynamic mode rudimentary visco-elastic characterisation of materials.
 +
• Perkin Elmer DMA 8000 dynamic mechanical analyser (DMA) for the detailed measurement of viscoelastic behaviour of materials.
 +
• Micromeretics Accupyc Helium pycnometer for determination of solid density of porous materials
 +
• Micromeretics Geopyc pycnometer.
 +
• Leica optical microscope DM 2500M with Optical microscope with a Linkham CSS 450 hot stage shear cell
 +
• Diamond saw sample cutting and
 +
Buehler Alpha grinder polisher
 +
 
 +
</nowiki>

Revision as of 11:30, 8 February 2011



INSTITUTE OF APPLIED MATERIALS and SOUTH AFRICAN RESEARCH CHAIR IN CARBON TECHNOLOGY AND MATERIALS EQUIPMENT LIST Supplier Instrument AMS Laboratory Technologies TA Instruments TMA Q400 AMS Laboratory Technologies (Pfeiffer: Air and Vacuum Technologies) TA Instruments Simultaneous DSC-TGA SDT Q600 fitted with Pfeiffer vacuum ThermostarTM Gas analysis system Mass Spectrometer (Up to 1500 C) Microsep Mettler Toledo Stare TGA/SDTA (Up to 1500 C) LAS (Life and Analytical Sciences) Perkin Elmer TGA 4000 interfaced with Perkin Elmer Spectrum 100S FTIR via Perkin Elmer Redshift TG-IR (Up to 1000 C) LAS (Life and Analytical Sciences) Perkin Elmer DMA 8000 (Up to 600 C) Shimadzu Shimadzu DTA 50 (Up to 1500 C) ALS (Advanced laboratory solutions) Anton Paar Rheometer Physica MCR301 with 600 C furnace SMM Leica optical microscope DM 2500 M with Cambridge ??? hot stage shear cell (up to ?? C) Poretech Micromeritics Accupyc II 1340 gas pycnometer Poretech Micromeritics Geopyc 1360 Envelope and T.A.P. Density Analyser Mixing equipment Lenton LabPlant laboratory Spray Dryer (Model SD Basic) UNW Twin screw TX28P 28 mm 18 L/D compounder Dayton Ribbon Blender Apollo Scientific cc Buehler Alpha 2 speed grinder-polisher Jones Industrial mixer Jones Z-Blade mixer Silverson L4RT high shear mixer Furnaces and ovens Thermal Technologies INC 2 x 2800 C Graphitising furnaces Russet Large furnace Specify maximum temperature Vulcan Induction Furnace Specify maximum temperature Protea High Temperature furnace Specify maximum temperature Protea Tube furnace horizontal Specify maximum temperature PFE Tube furnace vertical Specify maximum temperature Various ovens Communition equipment Netzsch Netzsch LME stirred disk mill Lenton Ball Mill Presses and moulding equipment ???? Injection moulder (????) A.P. Design Hydraulic Press Others Beckman Centrifuge Vertex Pressure Vessel Vertex Hydraulic press ???? QUV weathering tester with A340 UV lamps The following instruments are available: • Anton Paar 301 high temperature (600°C) rheometer with dynamic capability and normal force measurement to determine the viscoelastic behaviour of carbon precursor materials during transformation to solid carbon. The instrument will also be used for food science and polymer research and is available for the study of colloidal and nanodispersions. It will be managed by the carbon group personnel. • TA Instruments DSC-TGA SDT Q600 Thermogravimetric analyser (TGA) with 1500°C capability fitted with a Pheiffer vacuum Thermostar MS mass spectrometer for chemical analysis of volatile species and with simultaneous differential thermal analysis (DTA). • TA Instruments TMA Q400 Thermo-mechanical analyser (TMA) (1000°C) for the expansion, softening and in dynamic mode rudimentary visco-elastic characterisation of materials. • Perkin Elmer DMA 8000 dynamic mechanical analyser (DMA) for the detailed measurement of viscoelastic behaviour of materials. • Micromeretics Accupyc Helium pycnometer for determination of solid density of porous materials • Micromeretics Geopyc pycnometer. • Leica optical microscope DM 2500M with Optical microscope with a Linkham CSS 450 hot stage shear cell • Diamond saw sample cutting and Buehler Alpha grinder polisher