Difference between revisions of "Analytical Instruments"

From Chemical Engineering @ UP wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
==Institute Of Applied Materials and South African Research Chair in Carbon Technology and Materials Equipment List==
  
−
+
{|
−
 
+
!Supplier
−
+
!Instrument
−
<nowiki>
+
|-
−
+
|AMS Laboratory Technologies || TA Instruments TMA Q400
−
 
+
|-
−
+
| AMS  Laboratory Technologies (Pfeiffer: Air and Vacuum Technologies) || TA Instruments Simultaneous DSC-TGA SDT Q600 fitted with Pfeiffer vacuum ThermostarTM Gas analysis system Mass Spectrometer (Up to 1500 °C)
−
INSTITUTE OF APPLIED MATERIALS and SOUTH AFRICAN RESEARCH CHAIR IN CARBON TECHNOLOGY AND MATERIALS EQUIPMENT LIST
+
|-
−
 
+
|Microsep || Mettler Toledo Stare TGA/SDTA (Up to 1500 °C)
−
Supplier Instrument
+
|-
−
AMS Laboratory Technologies TA Instruments TMA Q400
+
|LAS  (Life and Analytical Sciences) || Perkin Elmer TGA 4000 interfaced with Perkin Elmer Spectrum 100S FTIR  via Perkin Elmer Redshift TG-IR (Up to 1000 °C)
−
AMS  Laboratory Technologies
+
|-
−
(Pfeiffer: Air and Vacuum Technologies) TA Instruments Simultaneous DSC-TGA SDT Q600 fitted with Pfeiffer vacuum ThermostarTM Gas analysis system Mass Spectrometer (Up to 1500 C)
+
|LAS  (Life and Analytical Sciences) || Perkin Elmer DMA 8000 (Up to 600 °C)
−
Microsep Mettler Toledo Stare TGA/SDTA (Up to 1500 C)
+
|-
−
LAS  (Life and Analytical Sciences) Perkin Elmer TGA 4000 interfaced with Perkin Elmer Spectrum 100S FTIR  via Perkin Elmer Redshift TG-IR
+
|Shimadzu || Shimadzu DTA 50 (Up to 1500 °C)
−
(Up to 1000 C)
+
|-
−
LAS  (Life and Analytical Sciences) Perkin Elmer DMA 8000 (Up to 600 C)
+
|ALS (Advanced laboratory solutions) || Anton Paar Rheometer Physica MCR301 with 600 °C furnace
−
Shimadzu Shimadzu DTA 50 (Up to 1500 C)
+
|-
−
ALS
+
|SMM || Leica optical microscope DM 2500 M with Cambridge ??? hot stage shear cell (up to ?? °C)
−
(Advanced laboratory solutions) Anton Paar Rheometer Physica MCR301 with 600 C furnace
+
|-
−
SMM Leica optical microscope DM 2500 M with Cambridge ??? hot stage shear cell (up to ?? C)
+
|Poretech || Micromeritics Accupyc II 1340 gas pycnometer
−
Poretech Micromeritics Accupyc II 1340 gas pycnometer
+
|-
−
Poretech Micromeritics  
+
|Poretech || Micromeritics Geopyc 1360 Envelope and T.A.P. Density Analyser
−
Geopyc 1360 Envelope and T.A.P. Density Analyser
+
|-
−
Mixing equipment
+
! Mixing equipment
−
Lenton LabPlant laboratory Spray Dryer (Model SD Basic)
+
|-
−
UNW Twin screw TX28P 28 mm 18 L/D compounder  
+
|Lenton || LabPlant laboratory Spray Dryer (Model SD Basic)
−
Dayton Ribbon Blender
+
|-
−
Apollo Scientific cc Buehler Alpha 2 speed grinder-polisher
+
|UNW || Twin screw TX28P 28 mm 18 L/D compounder  
−
Jones Industrial mixer
+
|-
−
Jones Z-Blade mixer
+
|Dayton || Ribbon Blender
−
Silverson L4RT high shear mixer
+
|-
−
Furnaces and ovens
+
|Apollo Scientific cc || Buehler Alpha 2 speed grinder-polisher
−
Thermal Technologies INC 2 x 2800 C Graphitising furnaces  
+
|-
−
Russet Large furnace Specify maximum temperature
+
|Jones || Industrial mixer
−
Vulcan Induction Furnace Specify maximum temperature
+
|-
−
Protea High Temperature furnace Specify maximum temperature
+
|Jones || Z-Blade mixer
−
Protea Tube furnace horizontal Specify maximum temperature
+
|-
−
PFE Tube furnace vertical  Specify maximum temperature
+
| || Silverson L4RT high shear mixer
−
Various ovens
+
|-
−
+
! Furnaces and ovens
−
Communition equipment
+
|-
−
Netzsch Netzsch LME stirred disk mill
+
|Thermal Technologies INC || 2 x 2800 °C Graphitising furnaces  
−
Lenton Ball Mill
+
|-
−
+
|Russet || Large furnace Specify maximum temperature
−
Presses and moulding equipment
+
|-
−
???? Injection moulder (????)
+
|Vulcan || Induction Furnace Specify maximum temperature
−
A.P. Design Hydraulic Press
+
|-
−
Others
+
|Protea || High Temperature furnace Specify maximum temperature
−
Beckman Centrifuge
+
|-
−
Vertex Pressure Vessel
+
|Protea || Tube furnace horizontal Specify maximum temperature
−
Vertex Hydraulic press
+
|-
−
???? QUV weathering tester with A340 UV lamps
+
|PFE || Tube furnace vertical  Specify maximum temperature
−
 
+
|-
−
 
+
| || Various ovens
−
 
+
|-
−
 
+
! [http://en.wikipedia.org/wiki/Comminution Comminution] equipment
−
 
+
|-
−
 
+
|Netzsch || Netzsch LME stirred disk mill
−
 
+
|-
−
 
+
|Lenton || Ball Mill
−
 
+
|-
−
 
+
! Presses and moulding equipment
−
 
+
|-
−
 
+
|???? || Injection moulder (????)
−
 
+
|-
−
 
+
|A.P. Design || Hydraulic Press
−
 
+
|-
−
 
+
! Others
−
 
+
|-
−
 
+
|Beckman || Centrifuge
 +
|-
 +
|Vertex || Pressure Vessel
 +
|-
 +
|Vertex || Hydraulic press
 +
|-
 +
|???? || QUV weathering tester with A340 UV lamps
 +
|}
  
 
The following instruments are available:
 
The following instruments are available:
−
• Anton Paar 301 high temperature (600°C) rheometer with dynamic capability and normal force measurement to determine the viscoelastic behaviour of carbon precursor materials during transformation to solid carbon. The instrument will also be used for food science and polymer research and is available for the study of colloidal and nanodispersions. It will be managed by the carbon group personnel.
 
−
• TA Instruments DSC-TGA SDT Q600 Thermogravimetric analyser (TGA) with 1500°C capability fitted with a Pheiffer vacuum Thermostar MS mass spectrometer for chemical analysis of volatile species and with simultaneous differential thermal analysis (DTA).
 
−
• TA Instruments TMA Q400 Thermo-mechanical analyser (TMA) (1000°C) for the expansion, softening and in dynamic mode rudimentary visco-elastic characterisation of materials.
 
−
• Perkin Elmer DMA 8000 dynamic mechanical analyser (DMA) for the detailed measurement of viscoelastic behaviour of materials.
 
−
• Micromeretics Accupyc Helium pycnometer for determination of solid density of porous materials
 
−
• Micromeretics Geopyc pycnometer.
 
−
• Leica optical microscope DM 2500M with Optical microscope with a Linkham CSS 450 hot stage shear cell
 
−
• Diamond saw sample cutting and
 
−
Buehler Alpha grinder polisher
 
  
−
</nowiki>
+
* Anton Paar 301 high temperature (600 °C) rheometer with dynamic capability and normal force measurement to determine the viscoelastic behaviour of carbon precursor materials during transformation to solid carbon. The instrument will also be used for food science and polymer research and is available for the study of colloidal and nanodispersions. It will be managed by the carbon group personnel.
 +
* TA Instruments DSC-TGA SDT Q600 Thermogravimetric analyser (TGA) with 1500 °C capability fitted with a Pheiffer vacuum Thermostar MS mass spectrometer for chemical analysis of volatile species and with simultaneous differential thermal analysis (DTA).
 +
* TA Instruments TMA Q400 Thermo-mechanical analyser (TMA) (1000 °C) for the expansion, softening and in dynamic mode rudimentary visco-elastic characterisation of materials.
 +
* Perkin Elmer DMA 8000 dynamic mechanical analyser (DMA) for the detailed measurement of viscoelastic behaviour of materials.
 +
* Micromeretics Accupyc Helium pycnometer for determination of solid density of porous materials
 +
* Micromeretics Geopyc pycnometer.
 +
* Leica optical microscope DM 2500M with Optical microscope with a Linkham CSS 450 hot stage shear cell
 +
* Diamond saw sample cutting and Buehler Alpha grinder polisher

Latest revision as of 10:58, 9 February 2011

Institute Of Applied Materials and South African Research Chair in Carbon Technology and Materials Equipment List

Supplier Instrument
AMS Laboratory Technologies TA Instruments TMA Q400
AMS Laboratory Technologies (Pfeiffer: Air and Vacuum Technologies) TA Instruments Simultaneous DSC-TGA SDT Q600 fitted with Pfeiffer vacuum ThermostarTM Gas analysis system Mass Spectrometer (Up to 1500 °C)
Microsep Mettler Toledo Stare TGA/SDTA (Up to 1500 °C)
LAS (Life and Analytical Sciences) Perkin Elmer TGA 4000 interfaced with Perkin Elmer Spectrum 100S FTIR via Perkin Elmer Redshift TG-IR (Up to 1000 °C)
LAS (Life and Analytical Sciences) Perkin Elmer DMA 8000 (Up to 600 °C)
Shimadzu Shimadzu DTA 50 (Up to 1500 °C)
ALS (Advanced laboratory solutions) Anton Paar Rheometer Physica MCR301 with 600 °C furnace
SMM Leica optical microscope DM 2500 M with Cambridge ??? hot stage shear cell (up to ?? °C)
Poretech Micromeritics Accupyc II 1340 gas pycnometer
Poretech Micromeritics Geopyc 1360 Envelope and T.A.P. Density Analyser
Mixing equipment
Lenton LabPlant laboratory Spray Dryer (Model SD Basic)
UNW Twin screw TX28P 28 mm 18 L/D compounder
Dayton Ribbon Blender
Apollo Scientific cc Buehler Alpha 2 speed grinder-polisher
Jones Industrial mixer
Jones Z-Blade mixer
Silverson L4RT high shear mixer
Furnaces and ovens
Thermal Technologies INC 2 x 2800 °C Graphitising furnaces
Russet Large furnace Specify maximum temperature
Vulcan Induction Furnace Specify maximum temperature
Protea High Temperature furnace Specify maximum temperature
Protea Tube furnace horizontal Specify maximum temperature
PFE Tube furnace vertical Specify maximum temperature
Various ovens
Comminution equipment
Netzsch Netzsch LME stirred disk mill
Lenton Ball Mill
Presses and moulding equipment
???? Injection moulder (????)
A.P. Design Hydraulic Press
Others
Beckman Centrifuge
Vertex Pressure Vessel
Vertex Hydraulic press
???? QUV weathering tester with A340 UV lamps

The following instruments are available:

  • Anton Paar 301 high temperature (600 °C) rheometer with dynamic capability and normal force measurement to determine the viscoelastic behaviour of carbon precursor materials during transformation to solid carbon. The instrument will also be used for food science and polymer research and is available for the study of colloidal and nanodispersions. It will be managed by the carbon group personnel.
  • TA Instruments DSC-TGA SDT Q600 Thermogravimetric analyser (TGA) with 1500 °C capability fitted with a Pheiffer vacuum Thermostar MS mass spectrometer for chemical analysis of volatile species and with simultaneous differential thermal analysis (DTA).
  • TA Instruments TMA Q400 Thermo-mechanical analyser (TMA) (1000 °C) for the expansion, softening and in dynamic mode rudimentary visco-elastic characterisation of materials.
  • Perkin Elmer DMA 8000 dynamic mechanical analyser (DMA) for the detailed measurement of viscoelastic behaviour of materials.
  • Micromeretics Accupyc Helium pycnometer for determination of solid density of porous materials
  • Micromeretics Geopyc pycnometer.
  • Leica optical microscope DM 2500M with Optical microscope with a Linkham CSS 450 hot stage shear cell
  • Diamond saw sample cutting and Buehler Alpha grinder polisher
Retrieved from "http://chemeng.up.ac.za/wiki/index.php?title=Analytical_Instruments&oldid=984"