Difference between revisions of "Opto Troubleshooting"
(Created page with 'This page is dedicated to troubleshooting of the Opto22 system. Additions to this page should be made in a ''Symptom/Solution''-style. The goal is to provide a 'first place to lo...') |
(General info on OPTO modules (network related)) |
||
| Line 1: | Line 1: | ||
This page is dedicated to troubleshooting of the Opto22 system. Additions to this page should be made in a ''Symptom/Solution''-style. The goal is to provide a 'first place to look'-list for other Opto users and help minimise downtime. | This page is dedicated to troubleshooting of the Opto22 system. Additions to this page should be made in a ''Symptom/Solution''-style. The goal is to provide a 'first place to look'-list for other Opto users and help minimise downtime. | ||
__FORCETOC__ | __FORCETOC__ | ||
| + | == General Information == | ||
| + | This table contains info regarding the two Opto brains. It might be useful when troubleshooting network-related issues. Although the physical network point doesn't, strictly speaking, make a difference - it's good to know this in case of network restructuring (note: this has happened before). | ||
| + | {| border="1" cellpadding="2" | ||
| + | |- | ||
| + | |width="300pt" style="background:#A7C1F2"| | ||
| + | |width="350pt" style="background:#A7C1F2"|<center>'''Opto Brain 1'''</center> | ||
| + | |width="350pt" style="background:#A7C1F2"|<center>'''Opto Brain 2'''</center> | ||
| + | |- | ||
| + | |Physical network point||<center>D231</center>||<center>D232</center> | ||
| + | |- | ||
| + | |MAC Address||<center>00:A0:3D:00:17:8E</center>||<center>00:A0:3D:00:42:EA</center> | ||
| + | |- | ||
| + | |DNS Name||<center>opto1</center>||<center>opto2</center> | ||
| + | |- | ||
| + | |Static IP||<center>137.215.116.239</center>||<center>137.215.116.238</center> | ||
| + | |} | ||
== Opto Brains == | == Opto Brains == | ||
=== 3 Volt Fault === | === 3 Volt Fault === | ||
Revision as of 11:53, 16 February 2010
This page is dedicated to troubleshooting of the Opto22 system. Additions to this page should be made in a Symptom/Solution-style. The goal is to provide a 'first place to look'-list for other Opto users and help minimise downtime.
General Information
This table contains info regarding the two Opto brains. It might be useful when troubleshooting network-related issues. Although the physical network point doesn't, strictly speaking, make a difference - it's good to know this in case of network restructuring (note: this has happened before).
| Physical network point | ||
| MAC Address | ||
| DNS Name | ||
| Static IP |
Opto Brains
3 Volt Fault
Symptom
The LED indicating a 3 Volt fault is on and the Opto unit can't be communicated with. Resetting the IP manually (see Brain manual) is also not possible in this state.
Solution
Use a multimeter and check the 5V supply voltage to the rail; the Opto brains require 5V DC (+/-0.1V). If it's found that the supplied voltage is below 4.9V, adjust the output of the power supply (if possible). As a check, test the 'broken' power supply on a working Opto brain to confirm that it is indeed the power supply that has failed and not a short in the brain.
