FZG spares

From Chemical Engineering @ UP wiki
Revision as of 11:29, 2 August 2010 by Gerhard Marais (Talk | contribs)

Jump to: navigation, search
  • Angle Head Screws x6 -Position 104-.JPG
  • Bearing Cover x1 -Position 6-.JPG
  • Bolt For Gear Boxes x10 -Position 74-.JPG
  • Bolt For Holding Down Gear Boxes With Washers x2 -Position 27 & 28-.JPG
  • Centring Pins x2 -Position 66-.JPG
  • Holding Pins x2 -Position 34-.JPG
  • Key (A 8x5x50) x3 -Position 20-.JPG
  • Key For Torsion Shaft x4.JPG
  • Load Clutch Bolt x4 -Position 63-.JPG
  • Load Coupling Flanges x1 -Position 61 & 62-.JPG
  • Locking Nut (MB5) x2 -Position 10-.JPG
  • Nut (M25x1) x2 -Position 11-.JPG
  • Roller Bearing Inner Half x8 -Position 8-.JPG
  • Screw For Bearing Covers x11 -Position 29-.JPG
  • Slave Gear Shaft x1 -Position 43-.JPG
  • Slave Gear Shaft x1 -Position 46-.JPG
  • Test Gear Shaft (With Broken Centering Pin) x1 -Position 42-.JPG
  • Test Gear Shaft x1 -Position 44-.JPG
  • Torsion Shaft - 13 Diameter x1 -Position 645-.JPG
  • Torsion Shaft - 23 Diameter x1 -Position 45-.JPG
Retrieved from "http://chemeng.up.ac.za/wiki/index.php?title=FZG_spares&oldid=837"