T15 Carl Zeiss Axio Scope A1 Microscope

From Chemical Engineering @ UP wiki
Revision as of 14:37, 2 July 2013 by 137.215.117.126 (Talk) (Created page with 'Carl Zeiss Axio A1-Scope with Axiocam ERc 5S Microscope and Camera Used to: #Measure wear scar and/or wear track size #Capture wear scar and/or wear track appearance. Typical…')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Carl Zeiss Axio A1-Scope with Axiocam ERc 5S Microscope and Camera

Used to:

  1. Measure wear scar and/or wear track size
  2. Capture wear scar and/or wear track appearance.


Typically used with:

  1. BOCLE
  2. SL-BOCLE
  3. HFRR
  4. SRV

The microscope is used to capture an image of a contact surface after a lubricity test was performed. The surface appearance of the wear scar can then be rated and the wear scar measured. The microscope is equipped with three lenses that are used to obtain different enlargements of the image. These include a 5x-, 10x- and 20x zoom.

Below is an image of the microscope without the camera.

Axio-lab-a1.png

The microscope with the camera attached is shown in the following image.

Scope-axiocam.png

Documentation

User Manual

The user manual for the microscope : [1]

History of this Equipment

The microscope was recieved in 2013.

Current/Previous projects

The microscope is used along with all lubricity tests.