Quadcopter
From Chemical Engineering @ UP wiki
Revision as of 11:23, 12 November 2018 by Jonathan van Niekerk (Talk | contribs)
Introduction
The quadcopter rig consists of a quadcopter mounted on a stanchion. The control objective is to regulate the speed of the motors to maintain a hover position that is horizontal to the rig's base plate.
2018 - Jonathan van Niekerk
Build
The quadcopter is based on a commercially available F450 frame and Arduino Uno controller. A LiPo battery provides flight autonomy of about 15 min and the high current capacity required by the motors. The motors are fitted with 1045 propellers capable of providing the required thrust force to overcome gravity The measured angles are derived from a gyroscope and accelerometer mounted on the quadcopter base.Modelling Update modelling info.
Control Update control info.