Difference between revisions of "T15 Olympus BH microscope"
From Chemical Engineering @ UP wiki
| Line 25: | Line 25: | ||
=== User Manual === | === User Manual === | ||
| − | The user manual for the microscope : | + | The user manual for the microscope : |
| − | + | [ftp://ragnarok.up.ac.za/publicftp/lab/Tribology/Carl%20Zeiss/AxioScope_usermanual.pdf] | |
| − | + | ||
| − | [ftp://ragnarok.up.ac.za/publicftp/lab/Tribology/ | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
== History of this Equipment == | == History of this Equipment == | ||
Revision as of 15:26, 28 June 2013
Carl Zeiss Axio A1-Scope with Axiocam ERc 5S Microscope and Camera
Used to:
- Measure wear scar and/or wear track size
- Capture wear scar and/or wear track appearance.
Typically used with:
- BOCLE
- SL-BOCLE
- HFRR
- SRV
The microscope is used to capture an image of a contact surface after a lubricity test was performed. The surface appearance of the wear scar can the n berated and the wear scar measured. The microscope is equipped with three lenses that are used to obtain different enlargements of the image. These include a 5x-, 10x- and 20x zoom.
Below is an image of the microscope without the camera.
The microscope with the camera attached is shown in the following image.
Contents
[hide]Documentation
User Manual
The user manual for the microscope : [1]
History of this Equipment
The microscope was recieved in 2013.
Current/Previous projects
The microscope is used along with all lubricity tests.
