Difference between revisions of "T12 & T13 Ball On Cylinder Lubricity Evaluator (BOCLE) & Scuffing Load - Ball On Cylinder Lubricity Evaluator (SL-BOCLE)"

From Chemical Engineering @ UP wiki
Jump to: navigation, search
Line 13: Line 13:
  
 
----
 
----
Parameter                  BOCLE                                 SL-BOCLE
+
Parameter                  BOCLE                           SL-BOCLE
 
----
 
----
Fuel                        Aviation                               Diesel
+
Fuel                        Aviation                         Diesel
ASTM                        D5001                                 D6078
+
ASTM                        D5001                           D6078
Applied load                1 000 g (500 g weight)                 500 g break in
+
Applied load                1 000 g (500 g weight)           500 g break in, 500 to 5 000 g (incremental
                                                                  500 to 5 000 g (incremental
+
Duartion                    30 min                           30 s (break in), 60 s (per load)
Duartion                    30 min                                 30 s (break in), 60 s (per load)
+
Qualifying parameter        Wear scar size & appearance.     Load carrying ability, µ >= 0.175
Qualifying parameter        Wear scar size, shape and appearance. Load carrying ability, µ >= 0.175
+
 
----
 
----
  

Revision as of 10:30, 9 November 2012

Both the Ball On Cylinder Lybricity Evaluator (BOCLE) and the Scuffing Load - Ball On Cylinder Lubricity Evaluator work on the principle of testing the lubricity of a fuel/lubricant. A non-rotating ball is forced against a rotating cylinder. The cylinder is partially immersed in a bath of the fuel to allow the fuel to be constantly carried to the area of contact.

The BOCLE & SL-BOCLE machines operate on much the same principals. They are nearly identically constructed. They differ in: 1) The types of fuels they typically test. 2) The qualifying parameters and test methods (See ASTM link below). 3) The maximum load they can carry.

In this Table some basic differences are presented:


Parameter BOCLE SL-BOCLE


Fuel Aviation Diesel ASTM D5001 D6078 Applied load 1 000 g (500 g weight) 500 g break in, 500 to 5 000 g (incremental Duartion 30 min 30 s (break in), 60 s (per load) Qualifying parameter Wear scar size & appearance. Load carrying ability, µ >= 0.175


Documentation

User Manual

A single user manual exists for both machines.

ASTM Standards

MSDS of relevant Chemicals

Wiring diagrams

History of this Equipment

The equipment was recieved from Sasol in 2012 after being used there for a period of time. The equipment was conntected to the OPTO 22 network in 2012 by Jacques Langenhoven to allow data logging and control through the lab network and OPTO system.

Current/Previous projects

2012

Jacques Langenhoven, The commissioning of the BOCLE & SL-BOCLE in the Tribology lab