Difference between revisions of "T15 Carl Zeiss Axio Scope A1 Microscope"

From Chemical Engineering @ UP wiki
Jump to: navigation, search
(Current/Previous projects)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
Carl Zeiss Axio A1-Scope with Axiocam ERc 5S Microscope and Camera
+
Carl Zeiss Axio A1-Scope with Axiocam ERc 5S Microscope and Camera.
 +
Computer operated
  
 
Used to:  
 
Used to:  
Line 11: Line 12:
 
#HFRR
 
#HFRR
 
#SRV
 
#SRV
 +
#Failure analysis
  
 
The microscope is used to capture an image of a contact surface after a lubricity test was performed.  The surface appearance of the wear scar can then be rated and the wear scar measured.  The microscope is equipped with three lenses that are used to obtain different enlargements of the image.  These include a 5x-, 10x- and 20x zoom.
 
The microscope is used to capture an image of a contact surface after a lubricity test was performed.  The surface appearance of the wear scar can then be rated and the wear scar measured.  The microscope is equipped with three lenses that are used to obtain different enlargements of the image.  These include a 5x-, 10x- and 20x zoom.
  
#The following modules are available:
+
The following modules are available:
 
#Polarizer
 
#Polarizer
 
#Dark field
 
#Dark field
Line 31: Line 33:
  
 
== History of this Equipment ==
 
== History of this Equipment ==
The microscope was recieved in 2013.
+
This microscope is in use since 2013.
  
 
== Current/Previous projects ==
 
== Current/Previous projects ==
The microscope is used along with all lubricity tests.
+
The microscope is used in most tribology studies.

Latest revision as of 13:39, 15 July 2013

Carl Zeiss Axio A1-Scope with Axiocam ERc 5S Microscope and Camera. Computer operated

Used to:

  1. Measure wear scar and/or wear track size
  2. Capture wear scar and/or wear track appearance.


Typically used with:

  1. BOCLE
  2. SL-BOCLE
  3. HFRR
  4. SRV
  5. Failure analysis

The microscope is used to capture an image of a contact surface after a lubricity test was performed. The surface appearance of the wear scar can then be rated and the wear scar measured. The microscope is equipped with three lenses that are used to obtain different enlargements of the image. These include a 5x-, 10x- and 20x zoom.

The following modules are available:

  1. Polarizer
  2. Dark field

Axio-lab-a1.png

The microscope with the camera attached is shown in the following image.

Scope-axiocam.png

Documentation

User Manual

The user manual for the microscope : [1]

History of this Equipment

This microscope is in use since 2013.

Current/Previous projects

The microscope is used in most tribology studies.